DIY Electric Screwdriver with YX2530AM Motor Driver

If you are interested in making a DIY electric screwdriver, you can check out this project.

If you happen to have a motor driver chip, such as the YX2530AM bidirectional motor driver chip, you may suddenly get the idea of using it to build your own electric screwdriver.

Coincidentally, you also have an unused 3-function laser flashlight. First, you can disassemble it and keep the housing for later use.

You can gather some spare parts and assemble the main components.

You can manually make a control driver board and integrate a single-cell lithium battery charging circuit into it.

This is the semi-finished product. The screwdriver bit can be removed and replaced.

After powering it on for testing, you can see that the basic functions are working properly.

You can leave the charging port at the rear end of the device.

The charging indicator shows a red light while charging and a green light when fully charged. The battery is now fully charged, and all functions are working normally.

This is the final result. The DIY electric screwdriver is completed.