74HC4017D,653: Features, Specs & More
When your medical device delivers a misdiagnosis due to counter signal delays, or an industrial controller crashes unexpectedly at –40°C, the 74HC4017D,653 could be either a lifesaver—or the starting point of a disaster. With over 200 million units of this 83 MHz decade counter consumed annually worldwide, it surged to 231 in Q2 2025 about 22% above the industry average. In this comprehensive article, we'll delve into the intricacies of the 74HC4017D,653, uncovering its definition, key features, specifications, applications, and a closer look at its manufacturer.
Catalog
74HC4017D,653's Overview
The 74HC4017D,653 is a single 5-bit decade counter with ten fully decoded outputs and one input for clock signals. It counts from 0 to 9 in a sequential manner on each clock pulse and resets once the count completes. It is designed using high-speed CMOS technology, delivering fast performance and superior noise immunity.
Key Features
Let's delve into the standout features that make the 74HC4017D,653 a standout in the world of electronics:
· The IC functions as a decade up counter.
· It contains 10 individual outputs per counting cycle.
· It supports both positive-edge and negative-edge triggering.
· It is manufactured using CMOS process technology.
· The output type is push-pull, supporting direct drive of LEDs or digital loads.
· It offers an asynchronous reset function for flexible control.
· The device is uni-directional and does not support down counting.
· It is surface-mount compatible with SO-16 packaging.
· Low quiescent current ensures low-power operation.
· Wide operating voltage range from 2V to 6V supports a variety of applications.
· The maximum propagation delay is as low as 43ns at 6V, enabling high-speed operations.
· The part is available in tape and reel packaging, ideal for automated assembly.
Specifications
Now, let's take a closer look at the technical specifications that define the capabilities of the 74HC4017D,653:
Type | Parameter |
Type | Decade |
Logic Family | HC |
Logic Function | Counter/Divider |
Operation Mode | UP Counter |
Number of Elements per Chip | 1 |
Number of Element Inputs | 1 |
Number of Count Input Enables | 0 |
Number of Selection Inputs per Element | 0 |
Number of Element Outputs | 10 |
Number of Stages | 5 |
Reset Type | Asynchronous |
Direction Type | Uni-Directional |
Triggering Type | Positive-Edge/Negative-Edge |
Maximum Propagation Delay Time @ Maximum CL (ns) | 250@2V|50@4.5V|43@6V |
Absolute Propagation Delay Time (ns) | 375 |
Process Technology | CMOS |
Output Type | Push-Pull |
Minimum Operating Supply Voltage (V) | 2 |
Typical Operating Supply Voltage (V) | 5 |
Maximum Operating Supply Voltage (V) | 6 |
Maximum Quiescent Current (mA) | 0.008 |
Maximum Supply Current (mA) | 50 |
Propagation Delay Test Condition (pF) | 50 |
Parallel Enable Input | No |
Terminal Count Output | Yes |
Minimum Operating Temperature (°C) | -40 |
Maximum Operating Temperature (°C) | 125 |
Packaging | Tape and Reel |
Mounting | Surface Mount |
Package Height | 1.5(Max) |
Package Width | 4(Max) |
Package Length | 10(Max) |
PCB changed | 16 |
Standard Package Name | SO |
Supplier Package | SO |
Pin Count | 16 |
Applications
This IC finds applications in both industrial and consumer electronics. Designers often use it in:
1. LED Matrix Controllers: If you have the problem such as conventional multiplexers cause flicker at >100Hz refresh rates. In that case, you can use 74HC4017D's decoded outputs to drive LED rows, achieving 1kHz refresh rates.
2. Motor Speed Encoders: There is a challenge about to implement low-cost encoders misread pulses during direction reversals. You just need to pair with optical sensor to count motor shaft slots. Asynchronous reset handles sudden stops without missing counts.
3. Cost-Sensitive Timer Circuits: You can replace crystal oscillators with 74HC4017D + 555 timer.
74HC4017D,653's Manufacturer
Nexperia, a leading force in the electronic components industry, stands as a testament to innovation and expertise. Born out of NXP Semiconductors in 2017, Nexperia swiftly emerged as an independent company, building on a legacy of over 60 years of semiconductor excellence. With a rich history rooted in technological advancements, Nexperia has established itself as a global powerhouse, specializing in the design and manufacturing of essential electronic components. Renowned for its commitment to quality, reliability, and cutting-edge solutions, Nexperia continues to shape the future of electronics, providing components that drive advancements in various industries, from automotive to consumer electronics.
Conclusion
The 74HC4017D,653 excels in high-speed, low-power counting applications where decoded outputs simplify design. It outperforms alternatives like CD4017 in speed and 74LS series in power efficiency.
