DIY Brushless Electric Drill Powered Meat Grinder Conversion Guide

If you are interested in DIY meat grinders, you might want to check out this article.

If you have a meat grinder at home, but its motor windings have burned out due to overheating, don’t rush to throw it away.
You can try replacing the original motor with a brushless electric drill, and in theory it will definitely work.
You can first remove the stator and rotor windings from the meat grinder head motor, remove some silicon steel sheets, then keep the original main shaft. The bottom of the main shaft is connected to the blades, and the upper part leaves a certain length for connection with the electric drill.
In this way, the brushless drill provides power, making the meat and vegetable grinding very powerful, completely solving the problem of motor burnout.

This is a brushless electric drill.

Then you connect the drill to the modified meat grinder head.

At this point, you can try it out first.

The meat grinder has a thick, sturdy glass body, so you don’t need to worry about it breaking.

Your meat grinder also has double-layer blades.

Then remove the motor windings from the head.

After removing the motor windings from the head.

Then cut off a section of the upper part of the head.

After cutting the upper part of the head, you can cover it with an ABS plastic board.

The modification of this meat grinder is now complete, and it can grind meat and vegetables very easily.