DIY LED Light Board for a Magnifying Glass

If you are interested in making a DIY LED light board, you may want to check out this article.

If you happen to have a magnifying glass, you may find that it is difficult to see things clearly in a dark environment. Luckily, if you also have an LED board, you can come up with the idea of adding a light board to the magnifying glass. Once you have prepared all the materials, you can start making it.

First, disassemble the magnifying glass.

The tail plug fits perfectly into the position.

Then drill holes and use a small file to smooth the edges.

This is the position for the switch.

The lithium battery comes with a protection circuit, and its diameter is the same as the thickness of the handle. Placing it at the end of the handle can extend the length perfectly, making it very comfortable to hold.

Next, connect the wires.

After connecting the wires, seal them tightly with heat-shrink tubing, and then attach the LED board to the magnifying glass.

This is what it looks like after completion. Let’s take a look at the result. It works quite well. Even in a dark environment, it is still very bright and provides a much clearer view!