DIY Ozone Disinfection Box: How to Make One

If you are interested in making a DIY ozone disinfection box, you might want to take a look at this article.

Suppose you happen to have some components salvaged from an old water dispenser and a wine packaging box. Then, you may suddenly get the idea of using the packaging box and the components from the old water dispenser to make an ozone disinfection box.

This is the ozone generator from the water dispenser, and you have tested it and confirmed that it works properly.

This is the push-button switch.

You can use the mechanical timer removed from the old water dispenser, and you have confirmed that it works properly.

You will also need a wine packaging box.

First, you need to connect the wires, and you should cover the exposed wire ends with heat-shrink tubing.

Then, you need to make a hole in the divider so that ozone can flow between the two compartments.

After you install everything in place, you can cover the top with a cover plate.

You can install the timer and switch.

You can also view the timer and switch from another angle.

You can add a small red cap to the switch for decoration, and you can attach it with adhesive.

Completed.

You can now use it.